Hydraulic breakers and rock breaking equipment are the heart of the construction, mining and demolition industries. However, proper use and regular maintenance are essential to get high efficiency from these machines and reduce operating costs. In this guide, Beilite Hydraulic Breakers (Beilite Hydraulic Breakers), mistakes to avoid and spare parts strategies to keep your crusher in top shape.
1. Correct Operation Techniques: Balance of Power and Precision
To extend the life of excavator mounted crushers, operators should focus on the following techniques:
- 90 Degree Rule: There must always be a 90 degree angle between the crusher tip and the material to be crushed. Crushing at an angle causes side loading, which leads to rapid wear of the bushings and piston.
- Avoid Empty Kicks: Do not start the crusher until the tip is in full contact with the material. An empty stroke will cause the impact energy to return back into the crusher and cause the piston to crack.
- Hydraulic Pressure Adjustment: Beilite Hydraulic Breakers models, be sure to match the oil flow rate of the excavator with the requirements of the breaker.
2. Choosing the Right Bit: Murder, Blunt bit or Chisel?
High Click-through Rate Topic: Maximizing Material Penetration Incorrect tip handling can reduce productivity by up to .
- Moil Point: Best for crushing reinforced concrete and soft rock.
- Blunt Tool: In hard and igneous rocks, it is used to shatter the material by shaking it.
- Chisel Bit (Chisel): Ideal for trenching and directional crushing in sedimentary rock.
3. Avoiding Common Mistakes: Don't Throw Your Breaker in the Trash
Misuse can lead to thousands of dollars hydraulic breaker malfunction leads to remediation costs.
- Neglecting Lubrication: The crusher should be lubricated every two hours of active use. If pin and bushing lubrication is neglected, metal will rub against metal and cause major damage.
- Making a Lever: Never use the breaker bit to move or lift rocks. This will bend the retaining pins and break the bit.
4. Required Maintenance Tools and Spare Parts
Title: A Must-Have Stock List for Every Construction Site That's right Beilite Breakers Spare Parts Having a stock of (Beilite Crusher Spare Parts) prevents the whole business from stopping because of a $50 seal.
- Hydraulic Breaker Seal Kits: It is vital to prevent oil leaks and maintain nitrogen gas pressure.
- Crusher Repair Kits: Original Beilite Breakers Spare Parts using a replacement system maintains the original performance of the equipment.
- Nitrogen Charging Kit: A crusher whose gas pressure drops loses its impact power. Regular gas control and charging should be done.
5. Troubleshooting and Long Term Solutions
Title: Predictive Maintenance of Heavy Machinery Applying predictive maintenance methods allows you to prevent downtime before it happens.
- Daily Audit: Check for loose bolts, cracks in the housing and oil leaks around the lower bushing.
- Planned Service To protect the expensive piston and front housing, replace the crusher bushings as soon as they reach the manufacturer's wear limit.
SSS
1. Why use genuine Beilite spare parts?
Beilite Hydraulic Breakers To maintain the high performance of its products, the original Beilite Breakers Spare Parts use is essential. Genuine parts ensure an exact match with key components such as pistons and cylinders, preventing breakdowns and reducing your operating costs in the long term.
2. When should Beilite felt pads be replaced?
Each of the felt sets 600-800 working hours it is recommended to check the hydraulic system once a year. If a visible oil leak or loss of stroke power is noticed, it is recommended that replacement be carried out in the original Beilite with their parts.
Turkish 
English